Duolabs CAS Interface 3 plus

Available Options:
Name	Baseprice	+ Addons	= Summary
acessores: no accessoies	66,90 Euro		66,90 Euro
acessores: USB Cable	66,90 Euro	4,90 Euro	71,80 Euro

66,90 Euro incl. Tax. +

ART_NR:	CAS4
EAN_NR:
OEM_NR:

Status:

The CAS 3 Plus is the new version from the famous cas 3
Therefore the CAS Interface 3 plus can be regarded as a multifunction programmer suitable for the management of J-Tag, ISP, I2C, etc., through a USB port.
All features are explained in the User Manual available to download from our site.
The CAS Interface 3 plus will be available through our official distributors and via our online shop.
The Kit supplied with CAS Interface 3 plus comprises of:
- 1 CAS Interface 3 device - 1 20-Pin female cable, length 30 cm - 1 J-Card - 1 Dummy Card
Technical
The main features of this great device are as follows:
USB Full Speed connection at 12 Mbit RS-232 Serial Connection 20 Pin External Connector Internal Clock Speed 48Mhz No need for external power supply Full PCMCIA connector support Full support for next generation Wireless devices CAS Studio user friendly GUI
On the ground features:
- Common Access Modules (CAM):
? Magic Cam, Matrix Cam, Matrix Revolution, Matrix Reloaded, Matrix Reborn, and all CAMs based on SIDSA chipsets, which can be managed directly by means of a PCMCIA connector. For a full list of supported modules, open the Graphics Menu of Cas Studio. Remember to download the latest release from our web site.
Thanks to the High Speed internal clock Cas Interface 3 is around 4 times faster than Cas Interface 2. Most of software routines for Flash writing have been rewritten.
? Joker Cam, Zeta Cam and substantially all CAM modules based on NEOTION chipsets. These modules can be programmed and repaired using a J-Card. For a full list of supported modules, open the Graphics Menu of Cas Studio. Remember to download the latest release from www.duolabs.com.
? Dr@gon Cam; it is possible to program any version by inserting the Dr@gon Cam into Cas Interface 3 and using a Dummy Card. This mode eliminates the need of inserting the Dr@gon Cam into a receiver, which can sometimes damage the CAMs besides being unpractical. It is also possible to repair faulty Dr@gon Cams if they fail to initialize due to a faulty Flash Memory. To do so, it is sufficient to open the module and connect a few wires, following a procedure that can be easily implemented even by less expert users.
? X-Cam, with ANGEL and ORION chipsets, standard and premium version. It is possible to program any version by inserting the X-Cam into Cas Interface 3 and using a Dummy Card. This mode eliminates the need of inserting the X-Cam into the receiver, which can sometimes damage the CAMs besides being unpractical. It is also possible to repair faulty X-Cams if they fail to initialize due to a faulty Flash Memory. In this case it is necessary to open the module and connect a few wires, following a procedure that can be easily implemented even by less expert users.
- Smartcard programming. This feature is very important for all those who wants to program a Smartcard based on PIC microcontroller or Atmel microcontroller. The full list of Smartcard can be viewed directly from the graphical menu of Cas Studio. More... All the OS cased cards like Titanium Card, OPOS Card, Knotcard and more can be programmed without any problem throught the USB port. All future Smartcard can be supported thanks to the great flexibility of Cas Interface 3. Dr@gon Card Loader can be fixed if corrupted by the special repair function.
- RS-232 Phoenix Smartmouse emulation. This emulation can be done through the RS-232 serial port. No matter what's the clock speed for the Smartcard.
- DreamBox 56xx and 7000 series boot repairing function. If your DreamBox wil not reboot due to a faulty flash the CAS Interface 3 will solve your problem without the need for any special cables or hard soldering.
- Sidsa embedded chip Set-Top-Boxes programming. Program the Sidsa CA embedded module. This most works like Cam programming feature. No need for special cables or special connectors. Support receivers are Xtreme, Manhattan, Nextwave 2500.
- Cam Explorer. This is a real cool feature which allows the user to insert any Cam in the PCMCIA connector and browse the content of you Cam. This acts like a real Common Interface Set Top Box. It gives you the possibility to get into the menus and at the same time use all the remote controller features.
- Various Utilities. Various PC utilities are included in Cas Studio. All those tools are free of charge and can be freely used. Duolabs made them to give the user the possibility to enjoy other
* Sim Editor. This software allows you to edit your GSM smartcard. Save/edit phonebook, SMS and Smartcard files.
* Wincrypt. This software allows you to encrypt and decrypt your files and folders using as 3DES key your GSM Smartcard. This software works pretty much as Winzip but the encryption is secured by a secret key in your GSM Smartcard.

For more information, please visit this products webpage.

This product was added to our catalog on Wednesday 13 September, 2006.

Duolabs CAS Interface 3 plus

Samsung LE 26 R 32 26 Zoll 16:9 "HD-Ready" schwarz